Le Marquis de Sade

Forum du site sur le Marquis de Sade : http://www.sade-ecrivain.com

Vous n'êtes pas identifié.

#1 11-03-2019 07:08:23

juniperqq
Membre
Date d'inscription: 30-08-2018
Messages: 164

The Cause Cracking Of GI Steel Coil

Last time I introduced two factors that led to the cracking of GI steel coils. Today, GI steel coil with spangles manufacturer will talk about two other factors.

1. Material thickness and mold clearance

The matching of mold gap and material thickness during the stamping process is also an important factor leading to material cracking.

2. Processing lubrication

The surface roughness of the material will affect the oil storage capacity of the surface. The appropriate surface roughness of the steel coil is also very important for the stamping performance of the material. At the same time, the choice of oil quantity is very important. If the oil quantity is too small, the material will not be fully lubricated during the stamping process, which will cause the material to be stamped and cracked. If the oil quantity is too much, the material will slip easily during the striping and forming process. Production rhythm.

Hors ligne

#2 15-03-2019 01:57:42

Trace Michaels
Invité

Re: The Cause Cracking Of GI Steel Coil

The process requires clear understanding of the steps. - Phillip Elden

Pied de page des forums

Créez Votre Propre Forum
Insérer vos Graphiques
Dictionnaires de Traduction
Hébergé par ForumCrea.com