Le Marquis de Sade

Forum du site sur le Marquis de Sade : http://www.sade-ecrivain.com

Vous n'êtes pas identifié.

#1 07-11-2013 07:11:07

megan2008
Membre
Date d'inscription: 06-11-2013
Messages: 45

Insttustions for painting cast aluminum you should know

The applications of aluminum casting is a very wide rang,which involves a large number of productions and industries.Aluminum casting is widely used in automotive castins,machine tool castins,hardware casting and so on. Somebody may know technology of aluminum casting,however,hardly know the method to paint cast aluminum.do they?It is very important to paint the aluminum casting in right way.

When it comes to painting smooth, non-porous metallic surfaces, certain preparation steps must be performed to avoid problems with paint adhesion. Complicating the process is the fact that different types of metal require different application strategies. Surfaces like brass, steel and aluminum all require different preparation standards to promote paint adhesion. If you are planning to paint cast aluminum, you need to know the proper types of materials to use and the correct application techniques in which to apply them or you may run into problems.

The insturctions of painting cast aluminum are as follows:

1.Clean any slimy or greasy areas of the cast aluminum using a chemical degreaser.

2.Clean the aluminum thoroughly using a pressure washer. Use a water hose en lieu of a pressure washer if the aluminum is thin and could easily be damaged by forceful water pressure.

3.Apply blue painter's tape to all areas you want to protect from primer or paint.

4.Apply the zinc chromate-based primer to the cast aluminum using the 3 to 4-inch oil-based paintbrush. Do not over-apply or you may end up with runs and drips. Allow the primer to dry for at least two hours.

5.Clean the paintbrush at least three times with mineral spirits. Massage the mineral spirits into the bristles of the brush using your bare hands.

6.Apply oil-based paint to the cast aluminum in the same manner as you did the primer in Step 4. Allow the paint to dry for at least two hours. Apply additional coats as necessary.

crusher casting parts: http://www.ftm-china.com/product/mining … tings.html

Hors ligne

#2 25-11-2017 09:18:27

Ed Shayne
Invité

Re: Insttustions for painting cast aluminum you should know

It is really important to follow these steps. - Green Water Technologies

Pied de page des forums

Créez Votre Propre Forum
Insérer vos Graphiques
Dictionnaires de Traduction
Hébergé par ForumCrea.com