Le Marquis de Sade

Forum du site sur le Marquis de Sade : http://www.sade-ecrivain.com

Vous n'êtes pas identifié.

#1 05-01-2019 03:31:18

juniperqq
Membre
Date d'inscription: 30-08-2018
Messages: 76

Low Price Grinding Disc Precautions

Low Price Grinding Disc Precautions
1. The low price grinding disc is a valuable tool, only used to process high hardness materials, not suitable for grinding general steel or other soft materials.
2. After the diamond disc is mounted on the flange, it must be statically balanced before use. It should be noted that do not remove the flange from the disc until it has run out.
3. For machine tools using low price grinding discs, the rigidity is better, the spindle selection accuracy is higher, and it can be used for micro crossfeed. The appropriate amount of grinding must be chosen.
4. The coolant should be used as much as possible during grinding, which not only improves the grinding efficiency and grinding quality, but also the wear of the grinding disc. Commonly used coolants are kerosene, light diesel oil, light oil lamps, and kerosene is generally preferred.
5. When the new low-cost grinding disc is used, in order to obtain the correct shape, it needs to be trimmed. The dressing method can be done with a silicon carbide grinding disc or with a silicon carbide abrasive. The metal plate or the glass plate is trimmed by hand grinding. In order to low price grinding disc, a natural dressing method can also be used, that is, the new grinding disc is first used for rough grinding, and after being worn to have a security shape, it is used for fine grinding.

Hors ligne

#2 06-01-2019 17:33:56

Ed Williams
Invité

Re: Low Price Grinding Disc Precautions

It is important to follow the steps in order to maximize the uses of the equipment. - Doug Battista

Pied de page des forums

Créez Votre Propre Forum
Insérer vos Graphiques
Dictionnaires de Traduction
Hébergé par ForumCrea.com