Le Marquis de Sade

Forum du site sur le Marquis de Sade : http://www.sade-ecrivain.com

Vous n'êtes pas identifié.

#1 02-01-2019 08:51:58

Date d'inscription: 23-10-2018
Messages: 24

Inspections that should be done before China cut off disc is turned on

Large factories or small enterprises, in the use of China cut off disc, in order to ensure the safety of use, must be checked once a week, the cutting discs are maintained once a year. Many companies ignore these, pre-boot inspection and operational requirements, and caused a lot of sad reminders Occurs. Let's take a look at what checks should be done before the China cut off disc is used.
Check before boot:
1) Start the power supply. If the vibration and noise are abnormal, stop it immediately and list it for maintenance.
2) Check if the fasteners are loose, if necessary, tighten them.
3) Check if the grounding of the grinder is intact.
4) Move the grinding wheel by hand to observe whether the rotation of the grinding wheel is flexible and light, and listen to the sound of rubbing.
5) Check if the direction of rotation of the grinding wheel is correct, and the grinding debris will fly down from the grinding wheel in the correct direction.
6) Focus on checking whether the grinding wheel has cracks if it should be replaced immediately. Inspection method: tap the grinding wheel with a wooden stick to make a crisp sound.

Hors ligne

#2 10-02-2019 21:12:26

Mike Watson

Re: Inspections that should be done before China cut off disc is turned on

It is really important to follow through the correct ways of using the machine. - Doug Battista

Pied de page des forums

Créez Votre Propre Forum
Insérer vos Graphiques
Dictionnaires de Traduction
Hébergé par ForumCrea.com