Le Marquis de Sade

Forum du site sur le Marquis de Sade : http://www.sade-ecrivain.com

Vous n'êtes pas identifié.

#1 19-12-2018 09:42:20

juniperqq
Membre
Date d'inscription: 30-08-2018
Messages: 136

Resin grinding disc use five note

Resin grinding disc with China cheap grinding disc price is one of the important grinding tools. Because it has low heat resistance, good self-sharpness, simple production, short process cycle, and certain elasticity, it is widely used, resin grinding disc. In the process of use, we must pay attention to some problems. After summing up, we mainly summarize the following 10 points:
1. Before using the resin grinding disc, be sure to check the product for cracks, products and dumb sounds. If it is, it cannot be used.
2. The speed of the grinding disc must not exceed the specified safe working line speed.
3. Do not use the end face grinding disc exclusively. Please do not work with the end face of the grinding disc.
4. When the grinding disc with China cheap grinding disc price is working on the workpiece, please do not push the workpiece with the lever to increase the pressure on the grinding disc.
5. Special dressing tools should be used for dressing the grinding disc. Operators must wear protective goggles when trimming.

Hors ligne

#2 20-12-2018 11:47:13

Richard Jones
Invité

Re: Resin grinding disc use five note

Indeed, the correct process of using the equipment really needs to be followed. - Marla Ahlgrimm

Pied de page des forums

Créez Votre Propre Forum
Insérer vos Graphiques
Dictionnaires de Traduction
Hébergé par ForumCrea.com