Le Marquis de Sade

Forum du site sur le Marquis de Sade : http://www.sade-ecrivain.com

Vous n'êtes pas identifié.

#1 02-02-2018 04:12:53

Date d'inscription: 07-11-2017
Messages: 56

ultrafine mill parts operation principle

Ultrafine mill for material processing, whether it is for the production of hard materials, or for the production of brittle materials, all cannot do without the ultra fine mill grinding ring internal grinding roller and other parts of the assistance, but for the production process of different hardness materials, these parts subjected to wear and its service life is different here. Is to introduce the process of the machine for brittle materials.

If the ultrafine mill machining of brittle materials, at the time of production, is still the grinding roller grinding ring, blade parts will pulverize materials, but this time, these are the core components of grinding force than when machining hard materials, will be reduced, so in this case, the service life will be extended a lot so, this time, for these parts of the material requirements are not particularly strict, of course, can not be ignored.

In addition, ultrafine mill in which the hardness of the material processing, its internal structure is not changed, in general, the size and equipment blade space has a direct relationship, if it is too big to fail, will affect the operation, if it is too small to shovel the material is not up, it will affect the normal use, so that the machine structure will not change.

While working on the ultrafine mill, its working principle is not changed, so when the brittle material production, the internal parts will be worn, this determines the repair and maintenance of the machine is indispensable, this machining hard materials are the same, but in the work when the maintenance and maintenance operations are needed in shutdown conditions, and prevent the occurrence of safety accidents.

The article mainly introduces the production of ultrafine mill for brittle materials, a detailed introduction of the machine for some small hardness materials, such as the core parts material requirements are no longer the key, but also can not be ignored, in addition to the work, the life of the equipment is relatively prolonged, but because of the characteristics of work principle the equipment is the need for maintenance and maintenance, this operation requires in shutdown conditions, these are not to be ignored in the aspects of production.

Hors ligne

#2 03-02-2018 02:01:28

Tim Jones

Re: ultrafine mill parts operation principle

These materials are playing the major role in the industry today. - Steve Wyer

Pied de page des forums

Créez Votre Propre Forum
Insérer vos Graphiques
Dictionnaires de Traduction
Hébergé par ForumCrea.com